A Real-Time Dual-Mode High-Frequency Beamformer for Ultrafast and Focused Imaging

Nicholas A. Campbell; Jeremy A. Brown

doi:10.1109/TUFFC.2022.3151218

A Real-Time Dual-Mode High-Frequency Beamformer for Ultrafast and Focused Imaging

Nicholas A. Campbell, Jeremy A. Brown

Medicine

Résultat de recherche: Article › examen par les pairs

7 Citations (Scopus)

Résumé

A firmware-based high-frequency beam- former implementing both conventional transmit focused B-mode imaging and diverging wave ultrafast (UF) imaging for Doppler overlay was developed. The beamformer can generate one transmit focused frame with four transmit focal zones (FZs), and 68 UF frames with 16 diverging waves each at a 10-Hz frame rate. The beamformer firmware stores the beamforming delays as a single bit, enabling efficient compression within the internal memory. The beamformer was characterized using a 30-MHz 64-element phased array endoscope. The hybrid system generates a 128 line by 768-pixel focused B-mode image spanning 1.2-12.6 mm axially over a ±32° range of steering angles. In addition, the system generates an UF image that is 64 lines by 384-pixels spanning 3.5-10.8 mm axially over a ±16° angle.

Langue d'origine	English
Pages (de-à)	1268-1276
Nombre de pages	9
Journal	IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Volume	69
Numéro de publication	4
DOI	https://doi.org/10.1109/TUFFC.2022.3151218
Statut de publication	Published - avr. 1 2022

Note bibliographique

Publisher Copyright:
© 1986-2012 IEEE.

ASJC Scopus Subject Areas

Instrumentation
Acoustics and Ultrasonics
Electrical and Electronic Engineering

PubMed: MeSH publication types

Journal Article
Research Support, Non-U.S. Gov't

Accès au document

10.1109/TUFFC.2022.3151218

Autres fichiers et liens

Citer

@article{c7ecb2ad8cf04410b231fbeb3b92e8bc,

title = "A Real-Time Dual-Mode High-Frequency Beamformer for Ultrafast and Focused Imaging",

abstract = "A firmware-based high-frequency beam- former implementing both conventional transmit focused B-mode imaging and diverging wave ultrafast (UF) imaging for Doppler overlay was developed. The beamformer can generate one transmit focused frame with four transmit focal zones (FZs), and 68 UF frames with 16 diverging waves each at a 10-Hz frame rate. The beamformer firmware stores the beamforming delays as a single bit, enabling efficient compression within the internal memory. The beamformer was characterized using a 30-MHz 64-element phased array endoscope. The hybrid system generates a 128 line by 768-pixel focused B-mode image spanning 1.2-12.6 mm axially over a ±32° range of steering angles. In addition, the system generates an UF image that is 64 lines by 384-pixels spanning 3.5-10.8 mm axially over a ±16° angle. ",

author = "Campbell, {Nicholas A.} and Brown, {Jeremy A.}",

note = "Publisher Copyright: {\textcopyright} 1986-2012 IEEE.",

year = "2022",

month = apr,

day = "1",

doi = "10.1109/TUFFC.2022.3151218",

language = "English",

volume = "69",

pages = "1268--1276",

journal = "IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control",

issn = "0885-3010",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "4",

}

TY - JOUR

T1 - A Real-Time Dual-Mode High-Frequency Beamformer for Ultrafast and Focused Imaging

AU - Campbell, Nicholas A.

AU - Brown, Jeremy A.

PY - 2022/4/1

Y1 - 2022/4/1

N2 - A firmware-based high-frequency beam- former implementing both conventional transmit focused B-mode imaging and diverging wave ultrafast (UF) imaging for Doppler overlay was developed. The beamformer can generate one transmit focused frame with four transmit focal zones (FZs), and 68 UF frames with 16 diverging waves each at a 10-Hz frame rate. The beamformer firmware stores the beamforming delays as a single bit, enabling efficient compression within the internal memory. The beamformer was characterized using a 30-MHz 64-element phased array endoscope. The hybrid system generates a 128 line by 768-pixel focused B-mode image spanning 1.2-12.6 mm axially over a ±32° range of steering angles. In addition, the system generates an UF image that is 64 lines by 384-pixels spanning 3.5-10.8 mm axially over a ±16° angle.

AB - A firmware-based high-frequency beam- former implementing both conventional transmit focused B-mode imaging and diverging wave ultrafast (UF) imaging for Doppler overlay was developed. The beamformer can generate one transmit focused frame with four transmit focal zones (FZs), and 68 UF frames with 16 diverging waves each at a 10-Hz frame rate. The beamformer firmware stores the beamforming delays as a single bit, enabling efficient compression within the internal memory. The beamformer was characterized using a 30-MHz 64-element phased array endoscope. The hybrid system generates a 128 line by 768-pixel focused B-mode image spanning 1.2-12.6 mm axially over a ±32° range of steering angles. In addition, the system generates an UF image that is 64 lines by 384-pixels spanning 3.5-10.8 mm axially over a ±16° angle.

UR - http://www.scopus.com/inward/record.url?scp=85124753710&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85124753710&partnerID=8YFLogxK

U2 - 10.1109/TUFFC.2022.3151218

DO - 10.1109/TUFFC.2022.3151218

M3 - Article

C2 - 35148263

AN - SCOPUS:85124753710

SN - 0885-3010

VL - 69

SP - 1268

EP - 1276

JO - IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

JF - IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

IS - 4

ER -

A Real-Time Dual-Mode High-Frequency Beamformer for Ultrafast and Focused Imaging

Résumé

Note bibliographique

ASJC Scopus Subject Areas

PubMed: MeSH publication types

Accès au document

Autres fichiers et liens

Empreinte numérique

Citer