Résumé
The design, fabrication, and performance of miniature high-frequency annular arrays are described. A 50-MHz, 2-mm-diameter, 7-element, equal-area annular array was fabricated and tested. The array elements were defined using photolithography and the electrical contacts were made using ultrasonic wire bonding. The resulting transducer produced pulses with a -6 dB bandwidth of 52% and an insertion loss of -16 dB. A radiation pattern was collected by scanning the transducer array above the tip of a glass fiber. A -6 dB two-way beam width of 75 microns was found at f/2. The radiation pattern decreased smoothly to less than -60 dB at a distance of 550 microns.
| Langue d'origine | English |
|---|---|
| Pages (de-à) | 1010-1017 |
| Nombre de pages | 8 |
| Journal | IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control |
| Volume | 51 |
| Numéro de publication | 8 |
| DOI | |
| Statut de publication | Published - août 2004 |
| Publié à l'externe | Oui |
ASJC Scopus Subject Areas
- Instrumentation
- Acoustics and Ultrasonics
- Electrical and Electronic Engineering
Empreinte numérique
Plonger dans les sujets de recherche 'Design and fabrication of annular arrays for high-frequency ultrasound'. Ensemble, ils forment une empreinte numérique unique.Citer
Brown, J. A., Démoré, C. E. M., & Lockwood, G. R. (2004). Design and fabrication of annular arrays for high-frequency ultrasound. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 51(8), 1010-1017. https://doi.org/10.1109/TUFFC.2004.1324405